//
you're reading...
Mikrotik

setting modem speedy


video

Informasi setting modem yang digunakan untuk layanan Telkom Speedy

Adsl Modem SMC

 

Default IP: 192.168.2.1
Default password: smcadmin

Setting Bridge:

  1. Klik WAN
  2. Clik ATM PVC
  3. Klik VCI
  4. Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10
  5. Klik Save Settings

 

SMC

 

Setting PPPoE:

  1. Klik WAN
  2. Klik ATM PVC
  3. Klik VCI
  4. Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: nmrspeedy@telkom.net, Password: (password dari telkom), Confirm Password: , MTU: 1492
  5. Save Settings

 

Adsl Modem ZyXeL

P-660R

Default IP: 192.168.1.1
Default username: admin
Default password: 1234

Setting Bridge 

  1. Pilih Network
  2. Pilih WAN
  3. Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
  4. Pilih Maintenance
  5. Pilih Tools
  6. Restart

 

Setting PPPoE

  1. Pilih Network
  2. Pilih WAN
  3. Mode: Routing, Encapsulation: PPPoE, Username: ( nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
  4. Klik Maintenance
  5. Klik Tools
  6. Restart

 

 

Adsl Modem Shiro

 

Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

  1. Klik Advanced
  2. Klik WAN
  3. Klik New Connection
  4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
  5. Save Settings
  6. Restart Router

 

shiro

 

Setting PPPoE:

  1. Pilih Advanced
  2. Pilih WAN
  3. Klik New Connection
  4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit
  5. Save Settings
  6. Restart Router

 

shiro pppoe

 

 

Adsl Modem Aztech

 

Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

  1. Klik Advanced
  2. Klik WAN
  3. Klik New Connection
  4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
  5. Save Settings
  6. Restart Router

 

Setting PPPoE/Router:

  1. Klik Advanced
  2. Klik WAN
  3. Klik New Connection
  4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit.
  5. Save Settings
  6. Restart Router

 

 

Adsl Modem TECOM

AR1031

Default ip: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

  1. Klik Advanced Setup
  2. Klik WAN
  3. Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
  7. WAN Setup – Summary, Save
  8. Save/Reboot

 

tecom

 

Setting PPPoE:

  1. Klik Advanced Setup
  2. Klik WAN
  3. Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
  7. Cheklist Enable WAN Service, Service Name: Speedy, Next
  8. WAN Setup – Summary, Save
  9. Save/Reboot

 

tecom pppoe

 

 

Adsl Modem Billion

 

Setting:

  1. Login To: http://192.168.1.254
  2. User name = admin; Password = password dari telkom
  3. Klik -> OK
  4. Klik: Quick Start
  5. Edit Connection:
    Encapsulation = PPPoE LLC
    Bridge = Enabled
    Setting VPI = 8 dan VCI = 81 , and Than
    Static IP Setting
    IP Address = 0.0.0.0
    subnet mask = 0.0.0.0
    Gateway = 0.0.0.0
  6. Klik: – Submit
    - SAVE CONFIG
  7. Klik: Submit
  8. Wait Till process Configuration done !
  9. Configuration Done !

 

 

Modem Prolink

 

  1. Login To -> http:// 10.0.0.2
    User Name: admin
    Password: password
    Klik . . . . OK
  2. Chose Configurasi WAN:
  3. Select Adapter: Pilih Pvc3 (Indonesia)
  4. Edit Field:
    Bridge = Enable
    Encapsulation = 1483 Bridge IP LLC
    ATM VPI = 8
    ATM VCI = 81

    prolink Static IP Setting: “ just blank “
    IP Address = just empty
    Subnet Mask = just empty
    Gateway = just empty
    User Name = username@telkom.com. . . . . . ( optional ) *
    Password = xxxxxxxx . . . . . . . . . . . . . . . . . . .( optional ) *
    * If you choose to put username & password there just double clik explorer
    * If you not choose to put username & password there you have to create new connection at Network ConnectionCreate New Connection (Bridge) See here..>>Than Next:* Klik Submit* Klik Save ConfigurationNext: Save Reboot ….

 

 

Adsl Modem D-Link

DSL-302T

Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

  1. Klik Setup
  2. Klik Connection
  3. Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
  4. Klik Tools
  5. Klik System Commands, Save All, Restart

 

d-link

 

Setting PPPoE/Router:

  1. Klik Setup
  2. Klik Connection
  3. Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: nmrspeedy@telkom.net; Password: (password dari telkom); VPI=8; VCI=81, Apply
  4. Klik Tools
  5. Klik System Commands. Save All, Restart

 

d-link2

 

 

adsl Modem Repotec

 

  1. Buka Internet Explorer ketik: http://192.168.1.1
  2. Username: admin & Password: epicrouter
  3. Klik: OK
  4. Klik WAN
  5. Pic Adapter: Pvc0
  6. Klik Submit
  7. Virtual Circuit = Enabled
  8. Bridge & IGMP = Disable
  9. Each region was different from another region and for Bandung vpi:8 , vci: 81
  10. Service Category = UBR without PCR
  11. Protocol/Conection type = PPPoE
  12. Encapsulation = LLC/Snap-Bridging
  13. Put Username & Password from your provider
  14. Klik Submit.
  15. Klik Save Configuration (wait till Saving configuration done.)
  16. put DNS: 202.134.0.155 & 202.134.2.5

 

 

Adsl Modem Dareglobal

 

Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

  1. Klik Advanced Setup
  2. Klik WAN
  3. Find VPI/VCI: 8/81, Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
  7. WAN Setup – Summary, Save
  8. Save/Reboot

 

Setting PPPoE:

  1. Klik Advanced Setup
  2. Klik WAN
  3. Cari VPI/VCI: 8/81, Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Put your PPP Username: Nomorspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
  7. Centang Enable WAN Service, Service Name: Speedy, Next
  8. WAN Setup – Summary, Save
  9. Save/Reboot

 

Adsl Modem TP-Link

 

Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

  1. Klik Advanced Setup
  2. Klik WAN
  3. Find VPI/VCI: 8/81, Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
  7. WAN Setup – Summary, Save
  8. Save/Reboot

 

dareglobal

Setting PPPoE:

  1. Klik Advanced Setup
  2. Klik WAN
  3. Find VPI/VCI: 8/81, Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
  7. Cheklist Enable WAN Service, Service Name: Speedy, Next
  8. WAN Setup – Summary, Save
  9. Save/Reboot

 

 

Setting Modem Articonet ACN-100R dan ACN-110

 

Cara melakukan setting di komputer untuk akses ke modem Articonet.
Untuk setting di komputer dilakukan sesuai dengan operating system yang dipakai di komputer pelanggan, disini yang dibahas khusus untuk Windows XP.
Lakukan network setting di PC (komputer) sbb:

a. Start – Control Panel – Network Connection
b. arahkan kursor pada Local Area Connection yang aktif, kemudian klik kanan dan pilih properties
c. kemudian pilih menu Internet Protocol (TCP/IP) dan klik 2X, maka akan muncul menu General.
d. Pilih Obtain an IP Address Automatically kemudian pilih Obtain DNS server address automatically, kemudian tekan tombol OK.

Panduan cara setting modem ADSL Speedy koneksi PPPoE.(PPPoE)
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu “Advanced Setup” kemudian pilih “WAN” dan klik tombol “Edit” disebelah kanan tabel WAN Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = PPPoE
Encapsulation = LLC, kemudian klik tombol Next
Masukkan username dan password Speedy, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan “Enable WAN Service”, kemudian klik Next dan klik tombol Save
Setting PPPoE untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)

Berikut langkah setting modem ADSL Articonet untuk Dial-Up/Bridge.
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu “Advanced Setup” kemudian pilih “WAN” dan klik tombol “Edit” Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = Bridging
Encapsulation = LLC, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan “Enable Bridge Service”, kemudian klik Next dan klik tombol Save
Setting Bridge untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)

Setting modem Articonet untuk koneksi Bridging sudah selesai, langkah berikutnya setting koneksi Dial-Up di PC/komputer.

 

Panduan instalasi Dial Up koneksi ADSL menggunakan Windows 2000:

  1. Klik Start, klik Setting,klik Control Panel,
  2. Klik Network and Dial Up Connections.
  3. Klik Make New Connection, klik Next,
  4. Klik Dial Up to the Internet
  5. Klik I want to setup my internet manually, klik Next
  6. Klik I connect through a phone line and a modem klik Next
  7. Pilih dan klik modem ADSL yang sesuai
  8. Isi username:15xxxxxxxxxx@telkom.net
  9. Password: xxxxxxxx
  10. Klik OK dan Lanjutkan sesuai perintah yang muncul
  11. Klik Finish

 

Panduan installasi Dial Up koneksi ADSL menggunakan Windows Xp:

  1. Klik Start, klik Setting, klik Control Panel.
  2. Klik Network Connection
  3. Klik Create a New Connection, klik Next.
  4. Klik Connect to the Internet, klik Next
  5. Klik Setup my connection manually, klik Next
  6. Klik Connect Using Dial Up, klik Next
  7. Klik modem ADSL yang sesuai, klik Next
  8. Isi username: 15xxxxxxxxxx@telkom.net dan Password: *******
  9. Confirm password: xxxxxxxx
  10. kemudian beri tanda v pada pilihan “Add a shortcut to the desktop screen”
  11. Klik Finish

Setting Router COREGA CG-BARAA 100 V2

Setting Modem router Corega CG-BARAA 100 V2 with Speedy by TELKOM
Open the web browser IE/Mozilla and use address 192.168.1.1 for into the corega’s menu.
user : admin
password : 1234 (default)

First lookin the link Indicator if the link light is blink,look at the Advaced Setup
- ADSL – and change the ADSL Mode with ” G.DMT ” (default is “AutoSyn”).

next
go into Interface Setup menu ( Interface Setup – Internet )


- find and change the VPI=0 & VCI=35 (for SPEEDY @east java)Corega default is 8&35.
- Enter Username and Password Speedy (important!!! User=152xxxxxxxxx@telkom.net, and
password is sencitive Key).
- click Save.

Now you can use ISP facilities to connect INTERNET.

NOTE :
Firewall router is OFF to best performance.


Light Indicator Router Modem Corega type CG-BRAA 100V2:
Power : the light must green and stay.
eth : Conection between Computer and Router modem
Link : the light must green and stay. it’s Phone/DSL Line from speedy.
Internet : The light must green, it’s show your username & password is true.

 

About these ads

Diskusi

2 thoughts on “setting modem speedy

  1. how a nice…………………………

    Posted by - | 21 Oktober 2009, 3:36 pm
  2. TOLONG SAYA LAH SETTING SPEDY GA BISA NI, SY BRU PINDAH DAN RMH ITU ADA TELP KABEL, DAN ADA SPEDY NYA, TAPI UDAH DI LEPAS2 SMUA, SYA MAU SETING LAGI GIMANA YA, PLS BANTUAIN DONG

    Posted by herman | 23 Juni 2010, 7:09 am

Berikan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Logout / Ubah )

Twitter picture

You are commenting using your Twitter account. Logout / Ubah )

Facebook photo

You are commenting using your Facebook account. Logout / Ubah )

Google+ photo

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

%d blogger menyukai ini: